Fixing Infinix Note 2 X600 totally dead after flashing wrong firmware

!! PLEASE READ THIS ENTIRE POST BEFORE PROCEEDING !!!
this tutorial applies to all infinx note 2 X600 and it is not require a specified firmware do it when your phone totally dead (no boot, not detected by pc)

Caution :
your warrenty is void after doing this
Do it at your own risk, i'm not responsible for any bricks you may obtain. Please follow the thread rules and steps and everything will be gravy. Remember, select the right firmware for your phone

You must have the following to revive your phone:

- A hardware knowledge
- The right firmware for your phone " notice for 532 or 533 board "

X 600 H 532 A1 L
X 600 H 533 A1 L


X 600 H 533 B1 L

if you don't know your board number it will be written on the board as you will see in the pictures

-
infinix drivers and xflash tools
- and of course a pc

how to do it:
- install the drivers
- identify your board number for the right firmware

 

- after confirming that you have the right firmware
start xflash tool and load the scatter file and press start
- only connect the socket in the picture after that connect the usb cable " the pc must not detect the phone at this point "


 



- make a jumper between the ground and the force boot pinout

" just make the jumper for one touch don't keep them connected"


 

 

once you make that you must here that your pc recognize your phone and the xflash tool will make the rest

 
 

Comments

Popular posts from this blog

WHAT IS MONKEY VIRUS

LIST OF MTK ANDROID PHONES

MTK DROIDTOOL ERROR :ERROR - file adbd not install